Manjaro Linux Forum

Support for Community Editions => LXQt => Topic started by: Esclapion on 09. March 2016, 16:40:15

Title: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 09. March 2016, 16:40:15
Manjaro-Lxqt 16.03 released

The Manjaro Community is proud to present our new Lxqt Edition.
Manjaro-Lxqt aims to be light, fast and resource friendly, yet at the same time complete and ready to use for all typical everyday office- and multimedia-needs.



Screenshots

Clean :

(http://www.auplod.com/u/poudla7698b.png)


Dirty :

(http://www.auplod.com/u/opuadl7698c.png)



Main programs

- kernel 4.4.4 LTS, Manjaro settings manager, sddm, octopi, compton, redshift
- nonfree drivers included in the 64 bits only
- pcmanfm-qt, gimp, lximage-qt
- chromium (64 bits) or firefox (32), hexchat, transmission-qt
- abiword, qpdfview
- mpv, smplayer(mpv based). 32 -> qastools, 64 -> pulseaudio and pavucontrol
- gparted, qisousb, lxtask, xsensors
- multilib enabled (64)
- key Print Screen configured for taking screenshots (also with Alt or Shift)

This release comes with our advanced graphical installer Calamares as well as our CLI-installer. Stable branch was used to create these install medias.




Direct download link (https://sourceforge.net/projects/manjarolinux/files/community/LXQT/2016.03/)

Torrents (https://sourceforge.net/projects/manjarotorrents/files/community/LXQT/16.03/)
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: eugen-b on 09. March 2016, 17:07:23
Very elegant, as always!
I'm happy you were finally able to adapt new buildiso.
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: excalibur1234 on 09. March 2016, 17:29:45
i have not tested this yet, because i am still at work.

i do not remember seeing the wallpaper you use anywhere on the forum.
do you have a download link for it?

i will post again later, after testing this!
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: Holmes on 09. March 2016, 17:34:06
congratulations @Esclapion,
i will download and test!

vlw fwi, Holmes :)
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: eugen-b on 09. March 2016, 17:50:52
it has infinality preinstalled 8)
icon theme breeze-lxqt and overall theme mediterraneanlxqt
I can't resist not to download it, allthough I already have one LXQt with OpenRC.
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: Esclapion on 09. March 2016, 18:03:34
i have not tested this yet, because i am still at work.

i do not remember seeing the wallpaper you use anywhere on the forum.
do you have a download link for it?

i will post again later, after testing this!

If comes from deviant-art (http://orig06.deviantart.net/8070/f/2015/346/8/0/manjaro_linux_wallpaper__windows_10_inspired__by_nextsource-d9jurrg.png).
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: AJSlye on 09. March 2016, 18:14:26
Downloading this now to test it out. I have an older AMD 64 with the NVIDIA N-force chipset and gpu based desktop that refuses to work with Plasma 5's compositor, both the free and non-free drivers. I also prefer QT to GTK so if this works well on that old machine, I will be very, very happy. ;)
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: gohlip on 09. March 2016, 18:31:17
Congratulations and thanks. I have tested every version you have made and I will be testing this out also.
However, I won't be getting back to you anytime soon as I will be out of the country for 2 weeks, a week of which I will be out at sea.
Hope I can remember when I get back.

ps: your desktop screen looks like windows 10....  what happen to the winged creatures you always feature?
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: Esclapion on 09. March 2016, 18:42:07
It's a bit a joke (i have w10 in dual-boot for games). Wallpaper, theme, icons, and also mouse pointers are w10 like, i used a part of the "transformation pack" (http://gnome-look.org/content/show.php/Windows+10+Transformation+Pack?content=171327).

It allows us to compare speed and size of both.  ;D

(edit)

I only darkened slightly the w10 white who was FFFFF and tiring for the eyes.
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: oberon on 09. March 2016, 18:45:27
;D Congratulations, @Esclapion!
Looking great! 8)
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: excalibur1234 on 09. March 2016, 22:36:12
sometimes, there are little problems with the coloring of the theme, e.g. in the calendar (when you click on the clock) or in the terminal (when using yaourt), but these kinds of problems are common and can be solved by using other themes.

overall, a great release.
it is definitely user friendly.

i actually enjoy the wallpaper really much, it is makes such great fun about win10...

currently, i am testing the next version of pcmanfm-qt. it is becoming much better and finally, i do not think anymore it is inferior in comparison to thunar.
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: eugen-b on 10. March 2016, 00:00:17
I'm on live CD now and very pleased with the look, too!
Here is my feedback in chronological order:
- boot takes quite long, 2:10 for MHWD live script; checked Xorg.0.log and found only these lines which I don't get on other ISOs (if I remember correctly)
Code: [Select]
[   164.573] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   164.573] Entry deleted from font path.
[   164.573] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   164.573] Entry deleted from font path.
[   164.573] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   164.573] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   164.573] Entry deleted from font path.
[   164.573] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   164.573] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
- boot ends with a mouse cursor appearing while the boot messages are still visible - kind of cool, though
- no Manjaro Welcome, probably it never was there on your ISOs
Code: [Select]
CPU:       Single core Intel 230 (-HT-) cache: 512 KB flags: (lm nx sse sse2 sse3 ssse3) bmips: 3193
           clock speeds: max: 1596 MHz 1: 1596 MHz 2: 1596 MHz
Graphics:  Card: Intel 82945G/GZ Integrated Graphics Controller bus-ID: 00:02.0 chip-ID: 8086:2772
           Display Server: X.Org 1.17.4 driver: intel Resolution: 1366x768@59.79hz
           GLX Renderer: Mesa DRI Intel 945G GLX Version: 2.1 Mesa 11.1.2 Direct Rendering: Yes
Info:      Processes: 141 Uptime: 4 min Memory: 305.8/1993.0MB Init: systemd v: 229 Gcc sys: 5.3.0
           Client: Shell (bash 4.3.421 running in lxterminal) inxi: 2.2.35
- white lxterminal; I would prefer back qterminal
- leafpad - there is juffed-qt5-git in AUR, maybe not yet ready
- menu: I prefer a single logout dialog
- the window theme is to glaring white for my taste (Win10 mock up? Yes, it is. The whole theme block is called Krosoft. ;))
- I always replace Chromium by Qupzilla
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: Esclapion on 10. March 2016, 01:27:40
A lot of things, thanks.  ;) I answer only to :

1) my boot is very fast instead, live or installed. Do you use the default vbox options ?

2) for the color :

in /usr/share/themes/Krosoft :

2.1) change #f8f8f8 to something else in the whole line gtk-color-scheme of gtk-2.0/gtkrc
2.2) do the same in the whole file openbox-3/themerc

(edit)
you also change the color of lxterminal in the options, what i did also by default.

the krosoft value was ffffff. I hesitated between f8f8f8 and f0f0f0 for my iso.  ::)
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: AJSlye on 10. March 2016, 02:07:37
I'm really enjoying this so far. Two things I've noticed so far.
1: You ship with chromium as the browser but have Firefox listed under default applications for browser.
2: octopi-notifier-frameworks is installed and looks a bit out of place, octopi-notifier-qt5 would have a more native look on it's right click menu.

I'm still playing with this but so far I really like it.
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: Esclapion on 10. March 2016, 12:19:59
Thanks for the feedback.  :)

1) difficult to do, because 64 comes with chromium and 32 with firefox. Will think.

2) changed now, tx again.  ;)
Title: Re: [stable] Manjaro Lxqt 16.03 - 64 bits released !
Post by: Fatboy on 10. March 2016, 15:00:50
Good job Escaplion! Busy testing it and it flies! Still getting used to the LXQt environment though,but so far it is very pleasant.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 10. March 2016, 16:59:07
ISO 32 bits ready now. For people having few RAM, read also THIS TOPIC. (https://forum.manjaro.org/index.php?topic=31986.0).
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: growlinwolf on 12. March 2016, 07:58:11
Nice job Esclapion  ;D looking forward to this 8) will give you my feedback once done installing and testing
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Hijacks on 12. March 2016, 09:05:50
Where can I get this Wallpaper? It's very nice.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: growlinwolf on 12. March 2016, 09:10:45
Where can I get this Wallpaper? It's very nice.

http://orig06.deviantart.net/8070/f/2015/346/8/0/manjaro_linux_wallpaper__windows_10_inspired__by_nextsource-d9jurrg.png (http://orig06.deviantart.net/8070/f/2015/346/8/0/manjaro_linux_wallpaper__windows_10_inspired__by_nextsource-d9jurrg.png)

(http://i.imgur.com/A2UmTrm.png)

(http://i.imgur.com/NsgV0tb.png)
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 12. March 2016, 11:20:45
Tulliana  has also done one HERE (https://forum.manjaro.org/index.php?topic=4106.150).

(http://i.hizliresim.com/v54P1A.png)
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 12. March 2016, 13:17:01
Some of the components you used from the AUR were already out of date, but that's OK. LOL ;)

After looking in the AUR myself I found lxqt-qt5ct to come in really handy.
I'm also trying out lxqt_wallet, obconf-qt and my favorite audio application clementine-lxqt.
I'm still looking in the AUR for other QT5 based alternatives as well.

I've always liked connman when I used Enlightenment so I'm giving lxqt-connman-applet-git a go as well.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 12. March 2016, 13:29:00
lxqt-qt5ct is new for me, i must have a look.

connman doesn't work on some PC, it's because i leaved it. It's a pity, because network-manager and gnome-keyring are the only one who use gtk3. Without, i can remove it and have a lighter iso.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: excalibur1234 on 12. March 2016, 13:46:42
@esclapion: do not forget gvfs. this is the only package on my system, which requires gtk3. i hate it, but i do not find an alternative.

@ajslye: lxqt-connman-applet works fine. i use it for about 6 months now. it has problems with dark themes, but it works well.
but i agree with esclapion: connman is great, if it works for you, but it lacks some functions of networkmanager. some people do need these functions.

i have tested qt5ct before, but i did not know there is a lxqt version available. i will test it. thanks!
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 12. March 2016, 14:18:50
It's recent, i think. I never noted that in the past. gtk3 is a "recommended" dependency, i don't know it it's necessary  for normal use.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 12. March 2016, 15:14:38
The gtk3 recommended dependency of gvfs is only needed for recently used files support.
This would only effect gtk3 based applications that make use of GtkRecentManager.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 12. March 2016, 15:20:11
The gtk3 recommended dependency of gvfs is only needed for recently used files support.
This would only effect gtk3 based applications that make use of the GtkRecentManager.

Thanks. So, if it's only for gtk3 applications, it's not really necessary : if a calling gtk3 application needs it, it will brings gtk3.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 12. March 2016, 15:31:18
Thanks. So, if it's only for gtk3 applications, it's not really necessary : if a calling gtk3 application needs it, it will brings gtk3.

@Esclapion
Yes, gtk3 is only one package under Arch/Manjaro so any gtk3 based application would install this support anyway. ;)

@excalibur1234
If you don't mind me asking, what is it exactly that requires gvfs?
From what I understand, lxqt 0.10.x now uses solid instead of liblxqt-mount, so wouldn't the same be true of pcmanfm-qt?
I've removed gvfs and gvfs-afc from my system and all of my USB devices still come up and are mountable using the removable media applet.

Reference: http://lxqt.org/release/2015/11/02/release-0-10-0/
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 12. March 2016, 16:00:39
I've removed gvfs and gvfs-afc from my system and all of my USB devices still come up and are mountable using the removable media applet.

Reference: http://lxqt.org/release/2015/11/02/release-0-10-0/

Hmmm, really interesting.  :) We can simply remove gvfs and gvfs-afc, or we must add a package ?

Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 12. March 2016, 16:15:34
Hmmm, really interesting.  :) We can simply remove gvfs and gvfs-afc, or we must add a package ?

From what I can tell so far, gvfs and gvfs-afc are only needed for pcmanfm, pcmanfm-qt should now be using solid.
However, I'm not finished looking at all the code yet. ;)
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: mikronimo on 12. March 2016, 16:30:26
Is it possible to add lxqt to a Plasma install (5.5.5, with qt 5.5.1), due they are both based on qt? Is there a sort of wiki to do it?
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: excalibur1234 on 12. March 2016, 17:10:13
this sounds interesting, indeed.

i have to remove gvfs and see. somehow, i always installed gvfs out of habit.
at the moment i have gvfs, gvfs-afc, and gvfs-smb installed.
i have to test, whether i can connect to a network share without gvfs-smb.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 12. March 2016, 17:31:13
For me, install a heavy plasma on the light lxqt is to avoid. Why not use directly kde instead ?

So, it's possible, but...
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: mikronimo on 12. March 2016, 17:40:20
For me, install a heavy plasma on the light lxqt is to avoid. Why not use directly kde instead ?

So, it's possible, but...
I already run a plasma install on a intel i3 64 bit (as you can see under my avatar), and it works fine, so i would install lxqt alongside the plasma, ligth on heavy... change anything?
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: excalibur1234 on 12. March 2016, 17:51:24
here are wiki links how to install lxqt:
https://wiki.manjaro.org/index.php?title=Install_Desktop_Environments#LXQt
https://wiki.manjaro.org/index.php?title=Minimal_LXQt_installation
i think this is enough for you. just test it!

i have tested lxqt with kwin (plasma's window manager) before. look here how to do it:
https://wiki.manjaro.org/index.php?title=LXQt_with_kwin
it works, but i still encountered the typical kde bugs (which i just hate). so, for the time being i am using lxqt with openbox, but i definitely would like to use lxqt with kwin in the long term.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: mikronimo on 12. March 2016, 17:57:33
here is are wiki links how to install lxqt:
https://wiki.manjaro.org/index.php?title=Install_Desktop_Environments#LXQt
https://wiki.manjaro.org/index.php?title=Minimal_LXQt_installation
i think this is enough for you. just test it!

i have tested lxqt with kwin (plasma's window manager) before. look here how to do it:
https://wiki.manjaro.org/index.php?title=LXQt_with_kwin
it works, but i still encountered the typical kde bugs (which i just hate). so, for the time being i am using lxqt with openbox, but i definitely would like to use lxqt with kwin in the long term.
Thanks a lot, in the next days i'll try out... about which kind of kde bugs are you talking about?
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 12. March 2016, 18:11:41
@ Esclapion,

Here is the pcmanfm-qt dependency tree:

Pcmanfm-qt --> liblxqt libfm lxmenu-data
   libxqt --> kwindowsystem libqtxdg
      kwindowsystem --> qt5-x11extras libxfixes
          qt5-x11extras --> qt5-base
          libxfixes --> libx11 fixesproto>=5.0 (goes further but no more kde deps)
       libqtxdg --> libsm libxkbcommon-x11 qt5-base
   libfm --> dbus-glib libexif libfm-extra=1.2.4 menu-cache shared-mime-info
       dbus-glib --> dbus glib2 (goes further but no kde deps)
       libexif --> glibc
       menu-cache --> libfm-extra (redundant dep)
       shared-mime-info --> libxml2 glib2 (goes further but no kde deps)
   lxmenu-data --> (no more deps)
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: excalibur1234 on 12. March 2016, 18:21:14
here is my dependency tree of pcmanfm-qt (built today from the aur):
Code: [Select]
~ » pactree pcmanfm-qt-git
pcmanfm-qt-git
├─liblxqt-git
│ ├─qt5-base
│ │ ├─libjpeg-turbo
│ │ ├─xcb-util-keysyms
│ │ │ └─libxcb
│ │ │   ├─xcb-proto
│ │ │   ├─libxdmcp
│ │ │   │ ├─xproto
│ │ │   │ └─glibc
│ │ │   │   ├─linux-api-headers
│ │ │   │   ├─tzdata
│ │ │   │   └─filesystem
│ │ │   │     └─iana-etc
│ │ │   └─libxau
│ │ │     ├─glibc
│ │ │     └─xproto
│ │ ├─mhwd provides libgl
│ │ │ ├─hwinfo
│ │ │ │ ├─libx86emu
│ │ │ │ │ └─glibc
│ │ │ │ ├─bash
│ │ │ │ │ ├─readline
│ │ │ │ │ │ ├─glibc
│ │ │ │ │ │ ├─ncurses
│ │ │ │ │ │ │ ├─glibc
│ │ │ │ │ │ │ └─gcc-libs
│ │ │ │ │ │ │   └─glibc
│ │ │ │ │ │ └─ncurses provides libncursesw.so
│ │ │ │ │ ├─glibc
│ │ │ │ │ ├─ncurses
│ │ │ │ │ └─ncurses provides libncursesw.so
│ │ │ │ └─perl
│ │ │ │   ├─gdbm
│ │ │ │   │ ├─glibc
│ │ │ │   │ └─bash provides sh
│ │ │ │   ├─db
│ │ │ │   │ ├─gcc-libs
│ │ │ │   │ └─bash provides sh
│ │ │ │   └─glibc
│ │ │ ├─mesa
│ │ │ │ ├─libdrm
│ │ │ │ │ ├─glibc
│ │ │ │ │ └─libpciaccess
│ │ │ │ │   └─glibc
│ │ │ │ ├─wayland
│ │ │ │ │ ├─glibc
│ │ │ │ │ ├─libffi
│ │ │ │ │ │ └─glibc
│ │ │ │ │ ├─expat
│ │ │ │ │ │ └─glibc
│ │ │ │ │ └─libxml2
│ │ │ │ │   ├─zlib
│ │ │ │ │   │ └─glibc
│ │ │ │ │   ├─readline
│ │ │ │ │   ├─ncurses
│ │ │ │ │   └─xz
│ │ │ │ │     └─bash provides sh
│ │ │ │ ├─libxxf86vm
│ │ │ │ │ ├─libxext
│ │ │ │ │ │ ├─libx11
│ │ │ │ │ │ │ ├─libxcb
│ │ │ │ │ │ │ ├─xproto
│ │ │ │ │ │ │ └─kbproto
│ │ │ │ │ │ └─xextproto
│ │ │ │ │ └─xf86vidmodeproto
│ │ │ │ ├─libxdamage
│ │ │ │ │ ├─libxfixes
│ │ │ │ │ │ ├─libx11
│ │ │ │ │ │ └─fixesproto
│ │ │ │ │ │   ├─xproto
│ │ │ │ │ │   └─xextproto
│ │ │ │ │ └─damageproto
│ │ │ │ │   ├─xproto
│ │ │ │ │   └─fixesproto
│ │ │ │ ├─libxshmfence
│ │ │ │ │ └─glibc
│ │ │ │ ├─systemd
│ │ │ │ │ ├─acl
│ │ │ │ │ │ └─attr
│ │ │ │ │ │   └─glibc
│ │ │ │ │ ├─bash
│ │ │ │ │ ├─dbus
│ │ │ │ │ │ ├─libdbus
│ │ │ │ │ │ │ └─libsystemd
│ │ │ │ │ │ │   ├─glibc
│ │ │ │ │ │ │   ├─libcap
│ │ │ │ │ │ │   │ ├─glibc
│ │ │ │ │ │ │   │ └─attr
│ │ │ │ │ │ │   ├─libgcrypt
│ │ │ │ │ │ │   │ └─libgpg-error
│ │ │ │ │ │ │   │   ├─glibc
│ │ │ │ │ │ │   │   └─bash provides sh
│ │ │ │ │ │ │   ├─lz4
│ │ │ │ │ │ │   │ └─glibc
│ │ │ │ │ │ │   └─xz
│ │ │ │ │ │ └─expat
│ │ │ │ │ ├─iptables
│ │ │ │ │ │ ├─glibc
│ │ │ │ │ │ └─bash
│ │ │ │ │ ├─kbd
│ │ │ │ │ │ ├─glibc
│ │ │ │ │ │ └─pam
│ │ │ │ │ │   ├─glibc
│ │ │ │ │ │   ├─cracklib
│ │ │ │ │ │   │ ├─glibc
│ │ │ │ │ │   │ └─zlib
│ │ │ │ │ │   ├─libtirpc
│ │ │ │ │ │   │ └─krb5
│ │ │ │ │ │   │   ├─e2fsprogs
│ │ │ │ │ │   │   │ ├─bash provides sh
│ │ │ │ │ │   │   │ └─libutil-linux
│ │ │ │ │ │   │   ├─libldap
│ │ │ │ │ │   │   │ ├─libsasl
│ │ │ │ │ │   │   │ │ └─openssl
│ │ │ │ │ │   │   │ │   └─perl
│ │ │ │ │ │   │   │ └─e2fsprogs
│ │ │ │ │ │   │   └─keyutils
│ │ │ │ │ │   │     ├─glibc
│ │ │ │ │ │   │     └─bash provides sh
│ │ │ │ │ │   └─pambase
│ │ │ │ │ ├─kmod
│ │ │ │ │ │ ├─glibc
│ │ │ │ │ │ ├─zlib
│ │ │ │ │ │ └─xz
│ │ │ │ │ ├─hwids
│ │ │ │ │ ├─libcap
│ │ │ │ │ ├─libgcrypt
│ │ │ │ │ ├─libsystemd
│ │ │ │ │ ├─libidn
│ │ │ │ │ │ ├─glibc
│ │ │ │ │ │ └─texinfo
│ │ │ │ │ │   ├─ncurses
│ │ │ │ │ │   ├─findutils
│ │ │ │ │ │   │ ├─glibc
│ │ │ │ │ │   │ └─bash provides sh
│ │ │ │ │ │   ├─gzip
│ │ │ │ │ │   │ ├─glibc
│ │ │ │ │ │   │ ├─bash
│ │ │ │ │ │   │ └─less
│ │ │ │ │ │   │   ├─glibc
│ │ │ │ │ │   │   ├─ncurses
│ │ │ │ │ │   │   └─pcre
│ │ │ │ │ │   │     ├─gcc-libs
│ │ │ │ │ │   │     ├─readline
│ │ │ │ │ │   │     ├─zlib
│ │ │ │ │ │   │     ├─bzip2
│ │ │ │ │ │   │     │ └─glibc
│ │ │ │ │ │   │     └─bash
│ │ │ │ │ │   ├─perl
│ │ │ │ │ │   └─bash provides sh
│ │ │ │ │ ├─lz4
│ │ │ │ │ ├─pam
│ │ │ │ │ ├─libelf
│ │ │ │ │ │ ├─gcc-libs
│ │ │ │ │ │ ├─zlib
│ │ │ │ │ │ ├─bzip2
│ │ │ │ │ │ └─xz
│ │ │ │ │ ├─libseccomp
│ │ │ │ │ │ └─glibc
│ │ │ │ │ ├─util-linux
│ │ │ │ │ │ ├─pam
│ │ │ │ │ │ ├─shadow
│ │ │ │ │ │ │ ├─bash
│ │ │ │ │ │ │ ├─pam
│ │ │ │ │ │ │ └─acl
│ │ │ │ │ │ ├─coreutils
│ │ │ │ │ │ │ ├─glibc
│ │ │ │ │ │ │ ├─acl
│ │ │ │ │ │ │ ├─attr
│ │ │ │ │ │ │ ├─gmp
│ │ │ │ │ │ │ │ ├─gcc-libs
│ │ │ │ │ │ │ │ └─bash provides sh
│ │ │ │ │ │ │ ├─libcap
│ │ │ │ │ │ │ └─openssl
│ │ │ │ │ │ ├─libsystemd
│ │ │ │ │ │ └─libutil-linux
│ │ │ │ │ └─xz
│ │ │ │ ├─elfutils
│ │ │ │ │ └─libelf
│ │ │ │ ├─libomxil-bellagio
│ │ │ │ │ └─glibc
│ │ │ │ ├─expat
│ │ │ │ ├─libgcrypt
│ │ │ │ ├─libtxc_dxtn
│ │ │ │ │ └─glibc
│ │ │ │ └─llvm-libs
│ │ │ │   ├─gcc-libs
│ │ │ │   ├─zlib
│ │ │ │   ├─libffi
│ │ │ │   ├─libedit
│ │ │ │   │ └─ncurses
│ │ │ │   └─ncurses
│ │ │ ├─mhwd-db
│ │ │ │ ├─mhwd-nvidia
│ │ │ │ ├─mhwd-nvidia-304xx
│ │ │ │ ├─mhwd-nvidia-340xx
│ │ │ │ ├─mhwd-catalyst
│ │ │ │ └─mhwd-amdgpu
│ │ │ ├─v86d
│ │ │ │ └─glibc
│ │ │ └─pacman
│ │ │   ├─bash
│ │ │   ├─glibc
│ │ │   ├─libarchive
│ │ │   │ ├─acl
│ │ │   │ ├─attr
│ │ │   │ ├─bzip2
│ │ │   │ ├─expat
│ │ │   │ ├─lzo
│ │ │   │ │ └─glibc
│ │ │   │ ├─openssl
│ │ │   │ ├─xz
│ │ │   │ └─zlib
│ │ │   ├─curl
│ │ │   │ ├─ca-certificates
│ │ │   │ │ ├─ca-certificates-mozilla
│ │ │   │ │ │ └─ca-certificates-utils
│ │ │   │ │ │   ├─bash
│ │ │   │ │ │   ├─coreutils
│ │ │   │ │ │   ├─findutils
│ │ │   │ │ │   └─p11-kit
│ │ │   │ │ │     ├─glibc
│ │ │   │ │ │     ├─libtasn1
│ │ │   │ │ │     │ ├─glibc
│ │ │   │ │ │     │ └─texinfo
│ │ │   │ │ │     └─libffi
│ │ │   │ │ └─ca-certificates-cacert
│ │ │   │ │   └─ca-certificates-utils
│ │ │   │ ├─krb5
│ │ │   │ ├─libidn
│ │ │   │ ├─libssh2
│ │ │   │ │ └─openssl
│ │ │   │ ├─openssl
│ │ │   │ └─zlib
│ │ │   ├─gpgme
│ │ │   │ ├─libgpg-error
│ │ │   │ └─gnupg
│ │ │   │   ├─npth
│ │ │   │   ├─libgpg-error
│ │ │   │   ├─libgcrypt
│ │ │   │   ├─libksba
│ │ │   │   │ ├─bash
│ │ │   │   │ ├─libgpg-error
│ │ │   │   │ └─glibc
│ │ │   │   ├─libassuan
│ │ │   │   │ └─libgpg-error
│ │ │   │   ├─pinentry
│ │ │   │   │ ├─ncurses
│ │ │   │   │ ├─libcap
│ │ │   │   │ └─libassuan
│ │ │   │   ├─bzip2
│ │ │   │   ├─readline
│ │ │   │   ├─gnutls
│ │ │   │   │ ├─gcc-libs
│ │ │   │   │ ├─libtasn1
│ │ │   │   │ ├─readline
│ │ │   │   │ ├─zlib
│ │ │   │   │ ├─nettle
│ │ │   │   │ │ └─gmp
│ │ │   │   │ └─p11-kit
│ │ │   │   └─sqlite
│ │ │   │     └─readline
│ │ │   ├─pacman-mirrorlist
│ │ │   │ └─python
│ │ │   │   ├─expat
│ │ │   │   ├─bzip2
│ │ │   │   ├─gdbm
│ │ │   │   ├─openssl
│ │ │   │   ├─libffi
│ │ │   │   └─zlib
│ │ │   ├─archlinux-keyring
│ │ │   └─manjaro-keyring
│ │ ├─dbus
│ │ ├─fontconfig-infinality-ultimate provides fontconfig
│ │ │ ├─expat
│ │ │ └─freetype2-infinality-ultimate
│ │ │   ├─zlib
│ │ │   ├─bzip2
│ │ │   ├─bash provides sh
│ │ │   ├─xorg-xrdb
│ │ │   │ ├─libx11
│ │ │   │ └─libxmu
│ │ │   │   ├─libxext
│ │ │   │   └─libxt
│ │ │   │     ├─libsm
│ │ │   │     │ ├─libice
│ │ │   │     │ │ ├─glibc
│ │ │   │     │ │ └─xproto
│ │ │   │     │ └─util-linux
│ │ │   │     └─libx11
│ │ │   ├─libpng
│ │ │   │ ├─zlib
│ │ │   │ └─bash provides sh
│ │ │   └─harfbuzz
│ │ │     ├─glib2
│ │ │     │ ├─pcre
│ │ │     │ └─libffi
│ │ │     ├─freetype2-infinality-ultimate provides freetype2
│ │ │     └─graphite
│ │ │       └─gcc-libs
│ │ ├─systemd
│ │ ├─xcb-util-wm
│ │ │ └─libxcb
│ │ ├─libxrender
│ │ │ ├─libx11
│ │ │ └─renderproto
│ │ ├─libxi
│ │ │ ├─libxext
│ │ │ └─inputproto
│ │ ├─sqlite
│ │ ├─xcb-util-image
│ │ │ ├─libxcb
│ │ │ └─xcb-util
│ │ │   └─libxcb
│ │ ├─icu
│ │ │ ├─gcc-libs
│ │ │ └─bash provides sh
│ │ ├─qtchooser
│ │ │ └─gcc-libs
│ │ ├─libinput
│ │ │ ├─mtdev
│ │ │ │ └─glibc
│ │ │ ├─systemd
│ │ │ ├─libevdev
│ │ │ │ └─glibc
│ │ │ └─libwacom
│ │ │   ├─glib2
│ │ │   ├─systemd
│ │ │   └─libgudev
│ │ │     └─libsystemd
│ │ ├─libsm
│ │ └─libxkbcommon-x11
│ │   ├─libxkbcommon
│ │   │ ├─xkeyboard-config
│ │   │ └─glibc
│ │   └─libxcb
│ ├─qt5-x11extras
│ │ └─qt5-base
│ ├─kwindowsystem
│ │ ├─qt5-x11extras
│ │ └─libxfixes
│ └─libqtxdg-git
│   └─qt5-base
├─libfm
│ ├─dbus-glib
│ │ ├─dbus
│ │ └─glib2
│ ├─libexif
│ │ └─glibc
│ ├─libfm-extra
│ │ └─glib2
│ ├─menu-cache
│ │ └─libfm-extra
│ └─shared-mime-info
│   ├─libxml2
│   └─glib2
├─lxmenu-data
└─qt5-x11extras


i have just tested to run pcmanfm-qt without gvfs:
- i removed gvfs and installed solid-git and recompiled pcmanfm-qt-git from the aur. rebooted. result: usb sticks are no longer recognized and i cannot connect to samba shares.
- i reset my system (with pcmanfm-qt and gvfs-afc, gvfs-smb) and removed gtk3, but not gcr. i have still gtk2 installed. result: i count mount usb drives and connect to samba shares, but whenever i unmounted a drive pcmanfm-qt crashed. i think this behavior is acceptable to me.

as you can see, gtk3 is only dependent on these 2 packages on my system:
Code: [Select]
~ » pactree -r gtk3
gtk3
└─gcr
  └─gvfs
    ├─gvfs-afc
    └─gvfs-smb
so, i can afford to uninstall gtk3. let's see how the next update goes...
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 12. March 2016, 18:27:17
lxqt-panel pulls in solid, so no need for git. ;)
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 12. March 2016, 18:28:35
@ Esclapion,

Here is the pcmanfm-qt dependency tree:

Pcmanfm-qt --> liblxqt libfm lxmenu-data
   libxqt --> kwindowsystem libqtxdg
      kwindowsystem --> qt5-x11extras libxfixes
          qt5-x11extras --> qt5-base
          libxfixes --> libx11 fixesproto>=5.0 (goes further but no more kde deps)
       libqtxdg --> libsm libxkbcommon-x11 qt5-base
   libfm --> dbus-glib libexif libfm-extra=1.2.4 menu-cache shared-mime-info
       dbus-glib --> dbus glib2 (goes further but no kde deps)
       libexif --> glibc
       menu-cache --> libfm-extra (redundant dep)
       shared-mime-info --> libxml2 glib2 (goes further but no kde deps)
   lxmenu-data --> (no more deps)

I have solid installed from extra due to depency of calamares and kio. I will ask for that on the lx(de,qt) irc.

(edit)
We posted at the same time.  ;)
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 12. March 2016, 18:48:19
@ excalibur1234
I just mounted my 1tb WD passport USB external drive without gvfs.

When you removed gvfs and gvfs-afc you didn't remove usbmuxd or any other dependencies with it by accident, AKA use octopi or pamac to remove them?

You might also need kio installed to get this to work, I'm not sure since I use kmymoney which installed kio on my system.

Compiling from the latest code on git can be buggy.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 12. March 2016, 18:59:32
UPDATE: Nope, scratch that, I just looked and there is no gvfs, gvfs-afc or kio installed on my system.
Pcmanfm-qt still mounts all of my usb drives just fine, they even pop up in the removable media applet.

I can confirm however, that clicking on computer or network does complain about gvfsd-computer and gvfsd-network, but this could just be an issue with the .desktop file these use. These are after all specific function of gvfs and could be replaced with the kio alternatives. SMBclient wasn't even installed smbclient-stub was, before messing up my system I need to look into what this package is and what it does. I have no windows machines so samba support is not a necessity for me anyway.

I'm looking into this one it now.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: excalibur1234 on 12. March 2016, 19:24:17
When you removed gvfs and gvfs-afc you didn't remove usbmuxd or any other dependencies with it by accident, AKA use octopi or pamac to remove them?
yes, i did remove all dependencies with them. i will test this shortly again.


i looked at pcmanfm-qt-git before i did that, but it did not require any optional dependencies: there are none. imho, this would be a great way to tell users about hidden functionality.


i know that compiling from git can be buggy, but sometimes it gives you extra features (and because i am using pcmanfm-qt-git i also wanted to use solid-git).
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 12. March 2016, 20:33:32
Well, after rebooting my machine I noticed my usb devices not comming up or mounting anymore.
I went ahead and reinstalled gvfs then logout out and back in, low and behold my USB devices started mounting again.
I'll be the first to admit it when I was wrong, and I was wrong, gvfs is indeed needed.
I do sincerely apologize.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: growlinwolf on 12. March 2016, 21:29:44
Tulliana  has also done one HERE (https://forum.manjaro.org/index.php?topic=4106.150).

(http://i.hizliresim.com/v54P1A.png)

Awesome a lot cleaner and better. What did he use to clean it up really awesome job  8)
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: excalibur1234 on 12. March 2016, 21:37:22
@ajslye: this is not a problem at all!
i discovered i can install gvfs and uninstall gtk3 afterwards (with pacman -Rdd gtk3) and gvfs works almost as before. now, my system does not have gtk3 installed anymore.
thank you very much for your contribution!
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: eugen-b on 12. March 2016, 21:41:10
Very cool, excalibur123!
Maybe this is a bit off-topic here, but I need gvfs for making Evince/Atril open a file on the page on which I closed it. It somehow remembers the last state before closing. Would this functionality still work after uninstalling gtk3?
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 12. March 2016, 22:31:56
Very cool, excalibur123!
Maybe this is a bit off-topic here, but I need gvfs for making Evince/Atril open a file on the page on which I closed it. It somehow remembers the last state before closing. Would this functionality still work after uninstalling gtk3?

Those are both gtk applications and would need gvfs anyway.
GTK3 applications use GtkRecentManager and GtkFileChooser to remember these things.
I don't recall what GTK2 used for this.

This thread is about LXQT 16.03 and any issues or suggestions related to the applications installed with it.
If you have a question about Evince/Atril please open a new thread.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: eugen-b on 12. March 2016, 23:06:25
Thanks, AJSlye! I would love if qpdfview was able to remember the last page. I hope it gets there some day.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 13. March 2016, 02:25:49
I'm not sure what I did but mpv core dumps. I just went ahead and removed it along with smplayer-mpv then installed smplayer. At least I can watch videos again. ;)
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: pawelx on 13. March 2016, 09:05:22
I've noticed two issues in the live session:
- brightness keys don't work in Lenovo G50-30
- when you change the icon theme, it's impossible to change it back; you have to log out and in for the changes to take effect

I was also wondering if it's possible to reverse the order of the OK-Cancel buttons. The order starting with Cancel is virtually unusable to me. It's like reading backwards. I thought since Qt is related to KDE, the default KDE order would be used.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 13. March 2016, 13:12:55
Qt is not related to KDE, it's older. Lxqt don't use KDE tools, but Qt.

(edit)

To be more accurate, lxqt uses now (it was not the case at start) some elements of kde frameworks, but it's all. But not kdebase-runtime, for example.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 13. March 2016, 13:20:19
I'm not sure what I did but mpv core dumps. I just went ahead and removed it along with smplayer-mpv then installed smplayer. At least I can watch videos again. ;)

Strange. I use mpv for all, here, but my workshop is not under lxqt for the moment. 
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 13. March 2016, 15:20:08
I don't know I did remove smbclient-stub and installed smbclient, but shouldn't be it. Maybe a setting file was corrupted or removed.
I do know I need to use X11 in smplayer to watch videos at full speed on this machine.
This is an old Desktop that I needed to add Option "ShadowFB" "on" for the nouveau driver to work correctly and not corrupt the screen and lockup the system.
Code: [Select]
[james@james-office ~]$ inxi -F
System:    Host: james-office Kernel: 4.4.5-1-MANJARO x86_64 (64 bit)
           Desktop: LXQt Distro: ManjaroLinux 16.03 Capella
Machine:   System: Compaq-Presario product: RX895AA-ABA SR5023WM
           Mobo: ASUSTek model: IVY v: 1.01
           Bios: Phoenix v: 5.02 date: 02/02/2007
CPU:       Single core AMD Athlon 64 3800+ (-UP-) cache: 512 KB
           speed/max: 1000/2400 MHz
Graphics:  Card: NVIDIA C61 [GeForce 6150SE nForce 430]
           Display Server: X.Org 1.17.4 driver: nouveau
           Resolution: 1440x900@59.89hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.7, 128 bits)
           GLX Version: 3.0 Mesa 11.1.2
Audio:     Card NVIDIA MCP61 High Definition Audio driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.4.5-1-MANJARO
Network:   Card-1: NVIDIA MCP61 Ethernet driver: forcedeth
           IF: enp0s7 state: down mac: 00:1a:92:b5:2e:cb
           Card-2: Qualcomm Atheros AR9485 Wireless Network Adapter
           driver: ath9k
           IF: wlp3s0 state: up mac: 14:cc:20:2d:cf:2b
Drives:    HDD Total Size: 250.1GB (8.5% used)
           ID-1: /dev/sda model: SAMSUNG_SP2504C size: 250.1GB
Partition: ID-1: / size: 222G used: 12G (6%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 8.84GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors:   System Temperatures: cpu: 47.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 124 Uptime: 19:37 Memory: 761.7/3830.3MB
           Client: Shell (bash) inxi: 2.2.35
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 13. March 2016, 16:03:40
Normally, in smplayer options, you can choose mplayer or mpv. If it can help...

Else i prefer be based fully  on ffmpeg, and not have the gstreamer-plugins who are a bit obsolete. gst-plugins would be better, but they bring a lot of heavy dependency.

For encoding, by cons, those plugins cannot be avoided, afaik.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: badbodh on 15. March 2016, 03:40:36
Manjaro-Lxqt 16.03 released

You took "fanboy" to a whole new level. It actually hurts. Might as well release a pony version of it :P
I have already reported this to microsoft, so lawyer up !
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 15. March 2016, 13:40:48
Why not baka media player instead of smplayer?
The baka-mplayer package is QT5 based and has an install size of only 1.04 megs.
The SMplayer package is also QT5 based, however it has a much larger install size of 12.37 megs.

This is just a thought, though.

I'm still trying to figure out how I messed up MVP when mplayer works just fine. I mean mvp doesn't even work from the command line, core dump. It was working when I first installed my system, even after adding the xorg fix for my nvidia cards crashing issue with the nouveau driver, this has to be a setting somewhere.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: eugen-b on 15. March 2016, 13:51:19
You can do more things with SMplayer, download videos, create playlists, decode difficult formats, I heared. And many were looking forward for it to drop mplayer dependency and make it have optional dependency for either mplayer or mpv. But I use to open videos from file manager with mpv alone.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 15. March 2016, 15:50:22
Yes, and i don't have this dependency on mplayer, already dropped.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 17. March 2016, 18:00:00
OK, I did a another reinstall and so far I'm still able to use mpv. I've come to the conclusion that If I don't want to break MPV, I can not use octopi to remove any packages. I'm still not sure what dependency is removed when using octopi that caused mpv to core dump, but there definitely was one that did.
Things I remove and install:
chromium removed and replaced with firefox.
chromium-pepper-flash removed and replaced with flash-plugin.
Kmymoney installed.
kcalc installed as optional dependency for kmymoney.
octopi-notifier-frameworks removed and replaced with octopi-notifier-qt5
mhwd-chroot removed as this doesn't seem to work from an installed system, it gave me an error about no Linux systems found.
xcursors-menda removed since this caused issues with Preferences > LXQT settings > Apperence.

Some more issues I've found with the default settings.
Under Customize Look and Feel Krosoft-cursors is selected, but under Apperence Menda is selected.
The white font color setting for the panel makes the calendar dates unreadable, I changed this to a light grey or gray.

Possible bug: I had to click around on all of the icon themes in Appearance after clicking on menda before the selection would work properly. For some reason after clicking on Menda half of it's icons would still be showing in the preview area after clicking on any another theme, as long as I don't click on menda the preview changes normally. I'm not sure where the bug would be, xcursor-menda or the lxappearance?

Here two screen shots.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 17. March 2016, 21:31:57
Interesting, thanks.

- chromium & co replaced by ff, ok, question of taste

- kcalc an kmymoney brings a lot of KDE things depending of KDE. I try to avoid it in the ISO self

- octopi-notifier-frameworks already replaced in my current profile

- mhwd-chroot must work when run from the menu. I will have a look

- xcursors-menda was a users demand, i will remove it

- i wll see for the cursors, thanks

- The white font color setting for the panel makes the calendar dates unreadable, I changed this to a light grey or gray.

How, please ? I note the same problem.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 17. March 2016, 22:40:45
Interesting, thanks.

- chromium & co replaced by ff, ok, question of taste

- kcalc an kmymoney brings a lot of KDE things depending of KDE. I try to avoid it in the ISO self

- octopi-notifier-frameworks already replaced in my current profile

- mhwd-chroot must work when run from the menu. I will have a look

- xcursors-menda was a users demand, i will remove it

- i wll see for the cursors, thanks

- The white font color setting for the panel makes the calendar dates unreadable, I changed this to a light grey or gray.

How, please ? I note the same problem.

Yes I know. I wasn't making application suggestions, I was just observing that uninstalling these apps via the command line didn't mess up MPV, uninstalling them from Octopi did. There just has to be a dependency being removed via octopi that MPV needs that pacman is not.

I just find Kmymoney to be the easiest and most intuitive opensource finance application to use, besides who want's a personal finance application installed by a default anyway, as you say a matter personal taste ;)

I didn't check mhwd-chroot from the live media, just from the installed system.

Right click panel > Configure Panel > Click on font color > slide down to desired color, or enter the desired values in the fields provided.
Optionally, you could also manually edit ~/.config/lxqt/panel.conf.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 17. March 2016, 23:49:26
Works, thanks, but all fonts of the panel are changed, so less visible.

(http://i.imgur.com/JqH4kBC.jpg)
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: AJSlye on 18. March 2016, 00:06:50
Works, thanks, but all fonts of the panel are changed, so less visible.

(http://i.imgur.com/JqH4kBC.jpg)

Yea, it's a matter of finding a good balance. For me that setting works, but for others a bit lighter or darker or maybe even a different color combination between the panel and the fonts altogether would be better.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 18. March 2016, 18:14:11
I opened an issue on their github, see HERE (https://github.com/lxde/lxqt/issues/982#issuecomment-198395957).

(edit)

I you uncheck custom styling, the problem disappears, it's true.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: sbaragnaus on 20. March 2016, 11:43:28
I don't like default Windows 10 style. I've changed theme but tooltips became unreadable: white fonts with white background (the same happens with calendar).


Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: Esclapion on 20. March 2016, 13:23:11
See the preceeding message.  ;)
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: marties on 27. March 2016, 16:59:57
hi, after using (and loving it) and installed it, i noticed that under firefox there is a lack of checkboxes form (see my screen capture)

(https://framapic.org/6cwWr9FWJgaD/G9X9NUBbWhdr.png)

on the live iso it's the same,
test : install firefox (45.0.1 as for now) and try to login to manjaro's forum and check the "Always stay logged in" option, it's gone !

no problem on chromium.

any clue ?

Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: suslovsky on 30. March 2016, 13:58:38
Hi! I try to use this release and I meet some troubles:
1. partially support RTL (for my instance - hebrew)
2. Missing widget for keyboard switching
3. No bluetooth support at all
4. Partially dual-monitor support (I can't save Nvidia settings)
All another things works well and fast
sorry for my poor english
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: eugen-b on 30. March 2016, 15:33:45
Hi! I try to use this release and I meet some troubles:
1. partially support RTL (for my instance - hebrew)
2. Missing widget for keyboard switching
...
Hello and welcome!
1. I would guess that you need to install a Hebrew font, maybe culmus from AUR https://wiki.archlinux.org/index.php/Fonts#Hebrew
Then set this font in lxappearance (for gtk apps) and in lxqt-config-appearance for qt5 applications.
2. Maybe you will be ok without a widget, you can edit the xorg file like advised here https://wiki.archlinux.org/index.php/Keyboard_configuration_in_Xorg#Using_X_configuration_files
Quote
/etc/X11/xorg.conf.d/00-keyboard.conf
---------------------
Section "InputClass"
        Identifier "system-keyboard"
        MatchIsKeyboard "on"
        Option "XkbLayout" "cz,us"
        Option "XkbModel" "pc104"
        Option "XkbVariant" ",dvorak"
        Option "XkbOptions" "grp:alt_shift_toggle"
EndSection

Edit: There is a widget on LXQt called Keyboard state indicator (kbindicator) and it works on my machine. I had edited the /etc/X11/xorg.conf.d/00-keyboard.conf before, but you can also add a keyboard layout with this widget.
Title: Re: [stable] Manjaro Lxqt 16.03 released !
Post by: suslovsky on 31. March 2016, 21:31:19
Hi! I trully fond at culmus and the keyboard layout indicator, but still leave without BT and saving nvidia settings. Thank you so much.